Free BPL gprs -- WAP SETTINGS FOR MOBILE PHONES

BPL WAP SETTINGS FOR MOBILE PHONES
Connection name:- BPL WAP
data bearer: packet data
Access point name: mizone
User name: 919821099800
Prompt password: no
Password: bplmmsc
Authentication: normal
Homepage: http://wap.mizone.bplmobile.com/
ADVANCED SETTINGS
network type: IPv4
Phone IP address: automatic
DNS address: automatic
Proxy server address : 10.0.0.10
Proxy port address : 9401

For BPL aka LOOP mobile subscribers, surfing the internet over their mobiles is free [at least for 1 year after activation]. The settings below are the tried and tested as on April 2009. Use these settings in your connections settings where you have to define a new access point name [APN]. Once you have successfully established the WAP connection after going through the below mentioned settings, you can tether the phone to your PC and surf net on it!! Just note that whichever browser you use, in its connection settings put
PROXY Server Address: 10.0.0.10
PORT ADDRESS: 9401
and then you are good to go.
The highlighted button is used to Disconnect or Connect to internet. After your connection is established, Open any of your favorite browsers like Opera or Mozilla Firefox.
In Firefox Menu Bar, go to Tools>>Options>>Advanced>>Network>>Settings. Now do the settings as shown in the image below and click OK.
You are Done. Now you can use Free unlimited internet in Firefox.
The Configuration for Opera is Set Up as follows:
In Menu Bar, go to Tools>>Preferences>>Advanced>>Network>>Proxy Servers. Now do the settings as shown in the image below and click OK.
Thus you can use you free BPL WAP service as unlimited Internet service for your Computer/PC.
UPDATE:
I found out that some of you are having problems connecting to the Internet with the above method,So here is one more method for you.
Step 1: Go to Control Panel >> Network Places and Create a Dial up connection, using your Mobile.
Step 2: When being asked about the UserName and Password, Type +91…(your BPL Phone number) and Password as bplmmsc
Step 3: Keep the Dialling number as *99# and press Connect.
For Samsung Corby users, the settings are a bit different. Please check the comments posted below by ‘Ashay’ who has kindly posted working settings for Corby users.